Touch Taiwan — Display, Touch Panel, Smart Manufacturing Exhibition Booth Design & Build Guide

Latest editionApril 16 – 18, 2025
CityTaipei
VenueTaipei Nangang Exhibition Center
OrganizerTDUA (Taiwan Display Union Association)
FrequencyAnnual
Exhibitorsapprox. 350
Visitorsapprox. 45,000

How to build for this show: Photonics design language

Most exhibitors at Touch Taiwan — Display, Touch Panel, Smart Manufacturing Exhibition come from the Photonics & Lasers sector, so the booth should follow that industry's spatial grammar:

  • ·A live laser-processing or beam-path demo as the experience anchor
  • ·Precision components presented in jewelry-grade cases
  • ·Zoned lighting: a bright base with a local dark area for the demo
  • ·Let the laser perform: cut a small piece on the booth and hand it over — process evidence the visitor takes home
Read the full Photonics booth design guide →

Common booth sizes and budget reference

27 m²
3m × 9m (≈ 10ft × 30ft)
approx. US$2,900–4,700
36 m²
6m × 6m (≈ 20ft × 20ft)
approx. US$3,700–5,900
54 m²
6m × 9m (≈ 20ft × 30ft)
approx. US$5,100–8,800

Indicative ranges (design + build, floor space rental excluded), converted at RMB 6.8 = US$1. The itemized AI quotation, priced in RMB, is the binding figure.

FAQ

How far in advance should you plan a Touch Taiwan — Display, Touch Panel, Smart Manufacturing Exhibition booth?

Lock the design 8–12 weeks out: that leaves room for organizer drawing approval, material lead times and the on-site build schedule. Halls in Taipei typically open for build-up 2–3 days before the show. With BoothAI the design and quotation step collapses into a single day, so the time goes where it matters — approvals and logistics.

What booth size works for Touch Taiwan — Display, Touch Panel, Smart Manufacturing Exhibition?

Photonics exhibitors at shows like this usually take 27/36/54 sqm. A smaller footprint concentrates on the lead product; a larger one carries the full set of Photonics zones — display, meetings and storage. The choice follows your objective and budget.

What does a Touch Taiwan — Display, Touch Panel, Smart Manufacturing Exhibition booth cost to build?

Taking 36 sqm (≈ 20ft × 20ft) as the reference, a standard design-and-build lands around US$3,700–5,900 excluding floor space rental (converted at RMB 6.8 = US$1), moving with materials, finish and size. BoothAI prices every component line by line against the actual design.

Generate your Touch Taiwan — Display, Touch Panel, Smart Manufacturing Exhibition booth concept in 30 seconds

Enter your floor area and opening sides — BoothAI generates a 3D concept and an itemized quotation in the Photonics design language, then delivers it through a global build network.

Generate a free design →
← Browse all exhibition guides